Port Numbering For The X950-28Xsq And X950-28Xtqm Switches; Table 6: Link And Activity Status Leds For 10Gbps Breakout Cables - Allied Telesis x950 Series Installation Manual

Chapter 1: Overview
Port Numbering
for the
x950-28XSQ and
x950-28XTQm
Switches
32
The LED states for breakout cables are described in Table 6.
Table 6. Link and Activity Status LEDs for 10Gbps Breakout Cables
State
Solid Amber
Flashing Amber
Off
Table 7 lists the port numbering system for ports 25, 29, 33, and 37 on the
x950-28XSQ and x950-28XTQm switches when the switch is operating in
a stack with the VCStack feature:
Table 7. Port Numbering for Ports 25 to 37
Port
25
29
33
Description
At least one of the four ports on the breakout cable
has established a 10Gbps link to a network device.
At least one of the four ports on the breakout cable
is sending or receiving data.
Possible causes of this state are listed here:
- The transceiver slot is empty.
- None of the ports on the breakout cable have
established links to network devices.
- The LEDs are turned off. To turn on the LEDs,
use the eco-friendly button.
Note
The x950-52XSQ switch does not have the
eco-friendly button.
With Fiber Optic
Transceiver or
Direct Attach Cable
portn.0.25
portn.0.29
portn.0.33
With Breakout
Cable
portn.0.25
portn.0.26
portn.0.27
portn.0.28
portn.0.29
portn.0.30
portn.0.31
portn.0.32
portn.0.33
portn.0.34
portn.0.35
portn.0.36