Port And System Leds; Installation Options; Mac Address Table; Management Software And Interfaces - Allied Telesis x330 Series Installation Manual

Port and System
LEDs
Installation
Options
MAC Address
Table
Management
Software and
Interfaces
Note
The ports support full-duplex mode only.
Note
SFP and SFP+ transceivers are sold separately. Refer to the
product's data sheet on the Allied Telesis website for a list of
supported transceivers.
Note
The switches do not support the 7-meter AT-SP10TW7 direct
connect twinax cable.
Here are the port and system LEDs:
Speed/activity and duplex mode LEDs for the 10/100/1000Mbps

copper ports
Speed/activity LEDs for the 1/2.5/5/10Gbps Multi-Gigabit copper

ports
Speed/activity LEDs for the SFP+ ports

Switch ID number LED

Note
Refer to "Port LEDs" on page 30.
Here are the installation options for the switches:
Desk or tabletop

Standard 19-inch equipment rack

Wood or concrete wall

Here are the basic features of the MAC address tables in the switches:
Storage capacity of 16,384 dynamic entries

Storage capacity of 256 static entries

Automatic learning and aging

Here are the management software and interfaces:
AlliedWare Plus Management Software

Local management through the Console port

Remote Telnet and Secure Shell management

x330 Series Installation Guide for Virtual Chassis Stacking
23