Figure 54: Tightening The Two Captive Screws On The Ethernet Line Card - Allied Telesis AT-x950-28XSQ Installation Manual

Figure 54. Tightening the Two Captive Screws on the Ethernet Line Card
7. After installing the power supplies and optional XEM2 Line Card, go to
one of the following chapters:
 Chapter 5, "Installing the Switch on a Table" on page 91
 Chapter 6, "Installing the Switch in an Equipment Rack" on page 95
 Chapter 7, "Installing the Switch on a Wall" on page 103
AT-x950-28XSQ Switch and VCStack Installation Guide
89