Figure 39: Tightening The Two Captive Screws On The Ethernet Line Card - Allied Telesis x950 Series Installation Manual

Figure 39. Tightening the Two Captive Screws on the Ethernet Line Card
7. After installing the power supplies and optional XEM2 Line Card, go to
one of the following chapters:
Chapter 5, "Installing the Switch on a Table" on page 87

Chapter 6, "Installing the Switch in an Equipment Rack" on page 91

Chapter 7, "Installing the Switch on a Wall" on page 99

x950 Series Installation Guide for Stand-alone Switches
85