Connect An Additional Rf Earth (Ground) (Optional); Figure 17 Electrical Connector Locking Mechanism (Ixm200, Ixm600 And Ixm1200); Figure 18 Electrical Connector Locking Mechanism - Edwards iXM Series Instruction Manual

Figure 17 Electrical connector locking mechanism (iXM200, iXM600 and iXM1200)

1. Electrical connector locking mechanism 1. Electrical connector locking mechanism
3. Lever 3. Lever

Figure 18 Electrical connector locking mechanism

1. Electrical connector locking mechanism 1. Electrical connector locking mechanism
3. Locking screw 3. Locking screw
5. Protective cover 5. Protective cover

4.6.7 Connect an additional RF earth (ground) (optional)

We recommend that you to connect an additional RF (Radio Frequency) earth if the
system is operated in an area subject to high RF emissions:
1. Use a star washer to connect the end of the earth (ground) cable
view of the
used to secure the inlet flange.
2. Connect an additional earth (ground) cable to the RF earth (ground) stud
Controls/connectors on the rear of the
must be used (for example, use braided cable).
M56635880_D
M56635880_D - Installation
system) connected to the dry pumping system inlet to one of the bolts
Page 44
2. Locking screws 2. Locking screws
4. Protective cover 4. Protective cover
2. Pivot screw 2. Pivot screw
4. Lever (2 off) 4. Lever (2 off)
system). An applicable low impedance cable
10/2020 - ©Edwards Limited
(Figure: Front
(Figure: