Edwards iXM Series Instruction Manual page 76

Fault Warning 63.13 - Sensor Fault
Cause Sensor is faulty (short circuit)
Remedy Contact us.
Fault Warning 70.11 - DP E/C Temp High
Cause Pump dry end cover temperature is high
Remedy Check that the cooling water supply is connected and switched on. The supply must
be as per the specification given in
Fault Warning 70.13 - Sensor missing
Cause The dry pump end cover temperature sensor has possibly become disconnected
or failed
Remedy Check that the sensor is installed and is correctly connected.
Fault Warning 70.13 - Sensor Fault
Cause Sensor is faulty (short circuit)
Remedy Contact us.
Fault Warning 71.13 - AC Sup Missing
Cause The pump controller cannot communicate with the accessory module
1. Check that the accessory module is correctly connected to the pump and
Remedy
then cycle the power to the pump.
2. If this warning continues, contact us.
Fault Warning 84.11 - Exh Temp High
Cause The exhaust pipe temperature is too high.
Remedy Contact us.
Fault Warning 84.13 - Sensor missing
Cause The exhaust pipe temperature sensor has possibly become disconnected or
failed.
Remedy Contact us.
Fault Warning 84.13 - Sensor Fault
Cause Sensor is faulty (short circuit)
Remedy Contact us.
M56635880_D
M56635880_D - Fault finding
Cooling water data
Page 73
on page 21.
10/2020 - ©Edwards Limited