Edwards iXM Series Instruction Manual page 60

Note:
Gate valves additionally have an option of Fitted No Feedback for use where there
are no position feedback switches installed to the gate valve.
Table 27 FIT ACCESSORY menu
Gate Valve...
PB Gate Valve...
Water Sensor...
PB Water Sensor...
Active Gauge...
PB Active Gauge...
Exh Gas Temp...
PB Exh Gas Temp...
Remote Control
IP Configuration menu
1. This is a sub menu of the SETUP menu. Press up/down keys to scroll. Press ENTER
to open a sub menu.
2. Press CANCEL to return to the SETUP menu.
3. Refer to
the IP Configuration menu.
Table 28 IP Configuration menu
Host_Name...
DHCP Enable...
IP Address...
Address Mask...
Gateway...
DNS Server...
NTP Server...
SMTP Server...
MAC Address...
Domain Name...
* Press the up/down keys to select Enabled or Disabled and press ENTER to accept or
CANCEL to return to the IP Configuration menu.
§ For each address setting press the up/down keys to set the digit, press ENTER to accept
and move to the next digit or CANCEL to move back to the previous digit. Pressing ENTER
at the end of the line will accept the new setting and return to the Edit IP menu. Press
CANCEL at the start of the line to cancel and return to the IP Configuration.
M56635880_D
M56635880_D - Commission
Table: IP Configuration
Page 57
(Analog water flow)
(Analog water flow)
(Exhaust Gas Temperature)
(Exhaust Gas Temperature)
menu. Display only items press CANCEL to return to
(display only)
(Enabled / Disabled)
(xxx.xxx.xxx.xxx)
(xxx.xxx.xxx.xxx)
(xxx.xxx.xxx.xxx)
(xxx.xxx.xxx.xxx)
(display only)
(display only)
(display only)
(display only)
*
§
§
§
§
10/2020 - ©Edwards Limited