Edwards iXM Series Instruction Manual page 58

Test Mode
* This option requires a security code to access it.
§ The PDT must be in control to perform these functions.
GAS VALVES menu
1. Press up/down keys to scroll. Press ENTER to open a sub menu.
2. Press CANCEL to return to the SETUP menu. Settings do not appear if they are not
installed.
3. Refer to
4. Press ENTER to accept.
5. Press CANCEL to return to the GAS VALVES menu.
Table 24 GAS VALVES menu
Set N
2
Set Inlet 1
Set Bypass
Set Exhaust 2
USB menu
1. Press up/down keys to scroll. Press ENTER to open a sub menu.
2. Press CANCEL to return to the SETUP menu.
Table 25 USB menu
USB acquire logs...
USB upgrade...
USB configuration...
USB acquire logs menu
Data Log: On-board data log which shows parameters, status and events.
Session Log: When a PC is connected, records the user ID of the person who is
connected and the PC name. History of the configuration file updates on the pump.
Critical Logs: This option stores 22 minutes of data around a critical event (20 before and
2 after). Up to 4 critical events can be stored.
Configurations: It shows all the details of configuration software updates since the last
default reset on the pump.
USB upgrade menu
This is used to update the existing executive software on the pump.
M56635880_D
M56635880_D - Commission
Table: GAS VALVES
Seal
menu. Press the up/down keys to select on/off.
Page 55 10/2020 - ©Edwards Limited