Edwards iXM Series Instruction Manual page 57

Description
Software Version Display menu
Display Serial Number
Display Serial Number for pXH
Fit Accessory menu
Fit Accessory menu for pXH*
Edit IP configuration menu
Edit configuration menu for pXH
Edit Display attributes menu
Set Time and Date
Display Pump Type
Display Pump Type for pXH
Gas Module type
Test Mode
* This option requires a security code to access it.
§ Time is set automatically when connected to a Fabworks network.
COMMANDS menu
1. Press up/down keys to scroll. Press ENTER to open a sub menu.
2. Press CANCEL to return to the SETUP menu.
3. Refer to
settings.
4. Press ENTER to accept.
5. Press CANCEL to return to the COMMANDS menu.
Table 23 COMMANDS menu
Gate Valve (Open/Shut)
MB Pump (On/Off)
PB Pump (On/Off)
Green Mode State (On/Off)
Green Mode Level
Gas Valves
Force Control
Set N
2
USB...
Reset MicroTIM
Default reset
Store detail log
M56635880_D
M56635880_D - Commission
*
§
Table: COMMANDS
*
§
§
§
*
Warnings
Display
S/W Version...
Serial Num...
PB Serial Num...
Fit Accessory...
Fit PB Accessory...
IP Config...
PB IP Config...
Display Attr...
Set Clock...
Show Pump type...
Show PB type...
Gas Module type
Test Mode...
menu. Press the up/down keys to select the new
Page 54 10/2020 - ©Edwards Limited