Safety Symbols - Edwards iXM Series Instruction Manual

1.2 Safety symbols

The safety symbols on the products shows the areas where care and attention is
necessary.
The safety symbols that follow are used on the product or in the product
documentation.
45
M56635880_D
M56635880_D - Safety and compliance
Warning/Caution
An appropriate safety instruction must be followed or caution to a po-
tential hazard exists.
Warning - Heavy object
Identifies a possible hazard from a heavy object.
Warning - Dangerous voltage
Identifies possible hazards from dangerous voltages.
Warning - Hot surfaces
Identifies a potential hazard from a hot surface.
Warning - Protective earth (ground)
Earth point for electrical equipment.
Warning - Use protective equipment
Use appropriate protective equipment for the task.
Warning - Maximum angle of paired slings
o MAX The maximum angle of the paired slings must not be more than 45°.
Warning - Moving parts present
Identifies parts that move. You must let the parts that turn stop before
you remove the electrical power.
Warning - Pressurised
The equipment contains pressurised gases/liquids.
Warning - Risk of explosion
There is a risk of explosion when you do the task.
Warning - RF earth
Earth point for radio equipment or antenna.
Page 9 10/2020 - ©Edwards Limited