Edwards iXM Series Instruction Manual page 59

USB configuration menu
Contact us.
Reset MicroTIM menu
This command deletes all the stored configurations on the microTIM.
INV FAULT HIST (Display Inverter Fault History) menu
1. This is a sub menu of the SETUP menu. Press up/down keys to scroll. Press ENTER
to open a sub menu.
2. Press CANCEL to return to the SETUP menu.
Refer to
history contains up to 32 entries, which has one alarm and one warning, where 1 is the
most recent. Press up/down keys to scroll. Press CANCEL to return to the Inverter Fault
History menu.
The inverter fault information is displayed in the format that follows:
DP Inv Fault nn
A:aaaa W:wwww
where nn is the number, aaaa is the alarm code and wwww is the warning code.
Refer to
warnings and alarms.
Table 26 INV FAULT HIST (Display Inverter Fault History) menu
DP Inv Fault Hst (Dry Pump Inverter Fault History)
MB Inv Fault Hst (Booster Inverter Fault History)
SOFTWARE VERSION display menu
1. This is a sub menu of the SETUP menu. Press up/down keys to scroll through the
software version loaded in the processors.
2. Press CANCEL to return to the SETUP menu.
FIT ACCESSORY menu
1. This is a sub menu of the SETUP menu. Press up/down keys to scroll. Press ENTER
to open a sub menu.
2. Press CANCEL to return to the SETUP menu.
3. Refer to
select Fitted or Not Fitted and press ENTER to accept or CANCEL to return to the
COMMANDS menu
M56635880_D
M56635880_D - Commission
Table: INV FAULT HIST (Display Inverter Fault History)
Inverter warnings and alarms
Table: FIT ACCESSORY
on page 83 for more information about inverter
menu. For an accessory press the up/down keys to
Page 56
menu. Each inverter fault
10/2020 - ©Edwards Limited