How To Upgrade Firmware Of The Network Controller - Roland VersaUV LEJ-640 Service Notes

4-3 HOW TO UPGRADE FIRMWARE OF THE NETWORK CONTROLLER

Turn on the main power SW and sub power SW.
1
Select [SYSTEM INFO.] > [NETWORK] > [IP AD-
DRESS] in the User's Menu and set the IP address.
Cancel the RIP if the RIP is running.
Open a browser on the PC and enter the IP address
2
which was set at [1].
Current fi rmware version appears.
The Internet Explorer is recommended.
Click [Update].
3
Specify the target fi le for upgrade and click [Update].
4
( Referential Time : 5min.)
4-24
MENU
[ ]
MENU
SYSTEM INFO.
[ ] [ ]
SYSTEM INFO.
NETWORK
[ ]
NETWORK
IP ADDRESS
[ ]
IP ADDRESS
192.168.000.003