Remove the 2 screws as shown in the fi gure to remove the
5
Carriage Cover.
The screws for fi xing the Carriage Cover are the
screw with washer.
Cut the Push Mount fi xing the Paper Side Sensor Cable and
6
Media Thickness Checking Sensor Cable.
The cables will be tied with insulock instead of the
Push Mount later.
Open the Wire Saddle for bundling the Paper Side Sensor
7
Cable and Media Thisckness Checking Sensor Cable.
Disconnect the Paper Side Sensor Cable and the Media
8
Thickness Checking Sensor Cable from the Print Carriage
Board.
Carriage Cover
CN14
3-121
CN21