Roland VersaUV LEJ-640 Service Notes page 228

Press the [MENU] key, and set [IP ADDRESS], [SUB-
3
NET MASK] and [GATEWAY ADDR.].
Press the Left and Right keys for cursor movement,
and the Up and Down keys for selecting value. After
setting an address, press the [ENTER] key to go next
,to address setting.
When [GATEWAY ADDR.] is set, it returns to the wait-
ing mode for receiving the fi rmware when the [ENTER]
key is pressed.
The setting made here is only temporary for
the fi rmware installation and it is not saved.
Start the Peck on PC.
4
When [Peck] screen is displayed, click [Select Port].
Select [Type 3] from [Product].
5
And select [Via Network] from [Select port] and input
printer IP address.
Click [OK].
WAITING
000.000.000.000
IP ADDRESS
192.168.000.003
SUBNET MASK
255.255.255.003
GATEWAY ADDR.
000.000.000.000
WAITING
192.168.000.003
4-20
MENU
[ ]
[ ]
[ ]