Select [I/S MENU] > [I/S CONTROL] > [CAP] > [CLOSE],
17
and press the [ENTER] key to move the Capping Unit up 1
step. Align the Guides at the two ends of the Capping Unit
with the Guides at the two ends of the Head Carriage by
moving the Head Carriage by hand. Then press the [ENTER]
key 2 times to Cap the Heads with adjusting the position of
the Head Carriage.
Fix the Pump Cover together with the Inner Plate.
18
Fix the I/S Cover.
19
Perform the following adjustment.
1. [4-7 CAP HEIGHT ADJUSTMENT]
Guide
Pump Cover
3-19
Guide
Inner Plate