Roland VersaUV LEJ-640 Service Notes page 247

Turn on the Sub Power SW while pressing Left, Up
1
and Right keys for LIMIT INITIALIZE mode.
Click [ENTER] key 4 times to skip the [HEAD HEIGH
ADJUSTMENT] and [AUTO CUTTER ADJUSTMENT],
and display the [MOVE TO CAP POS].
<LIMIT POSITION INITIALIZE>
Remove the I/S Cover.
2
Confi rm the relative positions of Head and Cap, mov-
3
ing the capping unit up and down with Up and Down
keys.
Make sure not to move the Carriage when the
Capping Unit is up because the heads could
be broken by touching the Capping Unit.
Align the guides on the both ends of the Cap-
ping Unit with the guides on the both ends of
the Carriage.
LIMIT INITIALIZE
MENU
NOW PROCESSING..
SETTING UP
HEAD HEIGHT
[ ]
NOW PROCESSING..
MOVE THE HEAD
TO THE HOME
[ ]
NOW PROCESSING..
Screw
Guide
4-39
+ SUB POWER ON
SETTING UP
AUTOCUT HEIGHT
NOW PROCESSING..
MOVE THE HEAD
TO THE HOME
[ ]
NOW PROCESSING..
MOVE TO CAP POS
Screw
I/S Cover
Hook