How To Upgrade Firmware - Roland Advanced Jet AJ-1000 Service Notes

4-3 HOW TO UPGRADE FIRMWARE (Referential Time : 5min.)
Check the AJ-1000 IP address.
1
It is necessary to prepare the followings to upgrade the FIRMWARE.
1. Firmware file
2. Windows PC (OS Windows2000/XP)
* Network port is required.
3. Peck3.exe
4. Network cable
*A cross cable is required when you connect AJ-1000 to PC directly.
Confirm that main power of AJ-1000 is turned "on " and
2
sub power of AJ-1000 is turned "off".
3
Start Peck3.exe.
[SUM ERROR] is displayed when the Main
Power SW is turned on if a brand new Main Board
is installed.
In case of that, the machine will be ready to
receive the firmware by pressing [ENTER] key.
4-17
SUM-EEROR
WAITING