Remove the 5 screws as shown in the fi gure to remove the
5
Pump Cover together with the Right Inner Plate.
Select [I/S MENU] > [I/S CONTROL] > [CAP] > [CLOSE],
6
and press the [ENTER] key. The Capping Unit moves up.
Press the [ENTER] key 3 times. (The Capping Unit moves up
in 3 steps.)
Turn off the Sub Power SW, and then turn off the Main Power
7
SW.
Disconnect the tube of the Cap Top from the Pump.
8
Replace the Cap Top one by one to avoid the
mistake that the tubes are connected to the wrong
pump.
Pump Cover
Guide
Sub Power SW
3-16
Inner Plate
Guide
< Rear side >
Main Power SW