Roland VersaUV LEJ-640 Service Notes page 224

Key Combinations
Function for Service
Service Mode
Upgrade F/W
Installing F/W
(At Main Board Change)
System Parameter
Initialize
Limit/Cut Down Position
Service Report
Function for Users
Language
Combination Key Selection
+
+
+
ENTER
+
ENTER
+
+
Combination Key Selection
+
MENU
4-16
Comments
Press [MENU] and [ ] to enter Service
Menu.
[UPDATE FIRMWARE?] will be displayed.
Press [ENTER] to upgrade F/W.
Use this when the main board is replaced.
[SUM-ERROR] will be displayed.
Press [ENTER] to upgrade F/W.
All parameters will be initialized.
Press [ENTER] to start initializing.
Press [ ] while aligning Carriage to cap
Heads, and press [ENTER].
Set up Cut Down Pos., and press [ENTER].
Service Report(Adjustment value) will be
printed.
Comments
Press[ ] and [ ] to select language.