Roland VersaUV LEJ-640 Service Notes page 215

SUB MENU FILL INK
FILL INK
When ink is not filled
SELECT INK TYPE
ECO-UV CMYKGlW
SUB MENU PUMP UP
PUMP UP
REMOVE CARTRIDGE
Goes next, when cartridge is removed
SUB MENU
HEAD REPLACE
HEAD REPLACE
SET CL-LIQUID
123456
Goes next, when cleaning cartridge is set
CHECK
DRAIN BOTTLE
SUB MENU HEAD WASH
HEAD WASH
REMOVE CARTRIDGE
123456
Goes next,
when cartridge is removed
PERIODIC CL.
SUB MENU
PERIODIC CL.
SUB MENU FAN CHECK
FAN CHECK VACUUM FAN
SUB MENU TU CHECK
TU CHECK TU
CHECK
A B C
DRAIN BOTTLE
INSTALL
DRAIN BOTTLE
FILLING INK...
Goes next, when completed
CHECK
DRAIN BOTTLE
A B C
PUMPING-UP...
123456
Goes next, when completed
CHECK
A B C DRAIN BOTTLE
FILLING INK...
SET CARTRIDGE
123456
Goes next, when cartridge is set
CHECK
A B C DRAIN BOTTLE
SET CL-LIQUID
123456
Goes next,
when cleaning cartridge is set
REMOVE CL-LIQUID
123456
Goes next,
when cleaning cartridge is removed
This menu is to select the type of periodic cleaning which is automatically performed during printing.
Options: WIPE / LIGHT / NORMAL / MEDIUM
LIGHT LIGHT
WIPE: Wiping and flushing only
LIGHT: Wiping and light evacuation (lighter than regular cleaning) only
NORMAL/MEDIUM: The regular cleanings that can be executed from the control panel
Cleaning period can be set up in PERIODIC CL. menu of the user menu.
This menu is to check FANs. Select a FAN type with [up] and [down] keys.
Press [ENTER] key for ON/OFF of FANs. FAN turns off automatically when exit this menu.
TU
START
When Take-Up unit is not connected
TU IS
4-7
Fills Ink to each print head. A to C shown on the lower LCD
are the head groups. Cursor can be moved with [left] and
[right] keys. Use [up] and [down] keys for ON/OFF. By
pressing [ENTER] key, it starts to fill ink for the selected
head groups. To exit the menu, press [left] key when the
cursor is on A.
NOTE: Normally, FILL INK is to be performed on the three
groups together. Performing this on individual head group
should be for a recovery only when PUMP UP or HEAD
WASH is performed individually.
SET CARTRIDGE
123456
Goes next, when cartridge is set
CHECK
DRAIN BOTTLE
Removes ink from each print head. The difference from
the user menu is that head group can be selected.
NOTE: When this is performed on individual head
group, the normal maintenance operations cannot be
performed. Normally PUMP UP is to be performed on
the three groups together. When it is necessary to
perform it individually, fill the same type of ink for
recovery with FILINK menu immediately.
REMOVE SOL CRT.
123456
Goes next, when cartridge is removed
REMOVE CL-LIQUID FILLING INK...
123456
Goes next,
when cleaning cartridge is removed
FILLING INK...
Washes print heads. A to B shown on the lower LCD are
the head groups. Cursor can be moved with [left] and [right]
keys. Use [up] and [down] keys for ON/OFF. By pressing
[ENTER] key, it starts to wash the selected head groups.
To exit the menu, press [left] key when the cursor is on A.
NOTE: When this is performed on individual head group,
the normal maintenance operations cannot be performed.
Normally, HEAD WASH is to be performed on the three
groups together. When it is necessary to perform it
individually, fill the same type of ink for recovery with FILL
INK menu immediately.
WASHING HEAD...
WASHING HEAD...
Goes next, when completed
Default: NORMAL
This menu is to confirm that Take-Up unit which is
STOP
connected to the connector equipped for Take-up
unit can be operated properly.
Refer to [4-11 TAKE-UP UNIT OPERATION CHECK].
[TU] menu supports the one named [TAKE UP]
located on the bottom of the right printer body.
NOT CONNECTED
Head wash and ink filling
after replacing head
CHECK
DRAIN BOTTLE