Move the Belt Holder by hand to the position of the screw
16
hole which is for fi xing with the carriage.
Fix the Belt Holder to the Head Carriage with the screws.
17
Use the new locked screws.
Fix the Ink Dampers to the head 3 and 4.
18
Tighten the Adjustment Screw to have tension on the Belt.
19
And tighten the 2 Fixingscrews as shown in the fi gure.
Do not tighten the Screws too hard.
Adjustment Screw
3-85
< Top view - Leftside of the Belt >
FIxingscrew