Network Settings; Setting A Fixed Ip Address - Roland TrueVIS SG3-540 Setup Manual

3. Network Settings

The IP address of this machine can be assigned automatically from a DHCP server. If there is a DHCP server
on your local network, no network settings are required. After connecting a LAN cable, carry out
the Software RIP(P. 55)
However, it takes time to assign the IP address if there is no DHCP server. If the message [Connection is
requiring too much time. Manually setting the IP address will improve the connection speed.] appears
when you tap , carry out
When connecting the computer and the machine directly, carry out
47).
If the computer you're using is connected to a number of networked devices or to the Internet, incorrect
settings may adversely affect the entire network. For detailed information about the settings, consult your
network administrator.

Setting a Fixed IP Address

Procedure
1.
Tap .
2.
Tap [System Information]>[Network].
3.
Tap [Obtain IP Address Automatically] to set it to [Disable].
4.
Tap to the right of [IP Address].
The numeric value input screen appears.
5.
Enter the IP address.
For the IP address, contact your network administrator.
6.
Tap [OK].
on the computer you are using.
Setting a Fixed IP Address(P. 45).
Directly Connecting to the Computer(P.
Setting
45
Installation