Roland VersaUV LEJ-640 Service Notes page 87

Using tweezers, grasp the bottom part of the Wiper and take
4
it off the hook.
Clean the Wiper Carriage and Scraper using the
Cleaning stick if they need to be cleaned.
Remove the Wiper and install the new one.
5
Fix the wiper so that the rubber side faces the front.
Hook the wipers as shown in the fi gure using the tweezers.
6
Make sure that the Wiper is on the hook. If the
Wiper is not hooked, it may fall off while in use.
Close the Front Cover, and press the [ENTER] key.
7
The Head Carriage moves back to the standby position
and the head cleaning starts automatically. When the head
cleaning fi nishes, the screen shown in the fi gure appears.
Wiper Carriage
Screw
MAINTENANCE
REPLACE WIPER
3-13
Scraper
Screw
I/S Cover
Hook