Roland VersaUV LEJ-640 Service Notes page 187

Fix the Damper Plate.
10
Make sure not to press it down to the Dampers.
Dampers could break.
* Fix the screws at the bottom of the Slotted hole.
Fix the Carriage Cover temporarily with the 2 screws shown
11
in the fi gure. And tighten them without distorting the Cover.
Be careful not to distort the Carriage Cover when tight-
ening the 2 screws.
The Carriage can be distorted and it may cause the
head position problem.
The screws for fi xing the Carriage
Cover are the screw with washer.
Damper Plate
Carriage Cover
Screw
3-113
Hook