Roland VersaUV LEJ-640 Service Notes page 231

Start the Peck on PC.
12
When [Peck] screen is displayed, click [Put Param-
eters].
[OPEN] screen is displayed.
13
Select the System Parameter fi le that was saved be-
fore the main board replacement.
Click [Open]. It starts to send the System Parameter to
the machine.
Click [Get Report] to import the System Report fi le.
14
Confi rm that the System Parameter is reloaded prop-
erly.
The addresses set at the step 11 are re-
placed with the addresses saved in the
System Parameter when [Put Parameter] is
executed.
4-23