Select [I/S MENU] > [I/S CONTROL] > [CAP] > [OPEN], and
4
press the [ENTER] key. The Capping Unit moves down and
allows you to move the Head Carriage by hand.
Turn off the Sub Power SW, and then turn off the Main Power
5
SW.
When replacing the Head, it is necessary to turn
off the Main Power SW. If not, the Head or the
Main Board could be broken. We recommend re-
placing the Head with the power cord unplugged.
Remove the 2 screws to remove the Carriage Cover.
6
The screws for fi xing the Carriage Cover are the
screw with washer.
Remove the Damper Plate.
7
SERVICE MENU
I/S MENU
I/S MENU
I/S CONTROL
I/S CONTROL
CAP
CAP
OPEN
Sub Power SW
Carriage Cover
Damper Plate
3-6
[
]
[
]
[
]
[
]
< Rear side >
Main Power SW