Select [I/S MENU] > [I/S CONTROL] > [HEAD UP/
16
DOWN] > [LOW], and press the [ENTER] key to set
the head height to [LOW].
Fix the Media thickness Checking Sensor Cable and the
17
Paper Side Sensor Cable using a insulock tie.
Slack the cables between the insulock and
pushmount off so that the cables are not plucked.
Fix the Media thickness Checking Sensor Cable and the
18
Paper Side Sensor Cable with the Wire Saddles as shown in
the fi gure.
Move the Head Carriage by hand to the Capping Position.
19
SERVICE MENU
I/S MENU
I/S MENU
I/S CONTROL
I/S CONTROL
HEAD UP/DOWN
HEAD UP/DOWN
LOW
4-80
[
]
[
]
[
]
[
]