Roland VersaUV LEJ-640 Service Notes page 99

Fix the Carriage Cover temporarily with the 2 screws as
17
shown in the fi gure. And tighten them without distorting the
Cover.
Be careful not to distort the Carriage Cover.
The Carriage can be distorted and it may cause the
head position problem.
The screws for fi xing the Carriage
Cover are the screw with washer.
Move the Head Carriage by hand slowly leftwards to the
18
position where it is not above the Capping Unit.
Turn on the Sub Power SW while pressing the Left, Right
19
and Down keys to enter the Service Mode.
Select [I/S MENU] > [I/S CHECK] and press the [ENTER] key
20
to check the motors and sensors of Cap (Up/Down), Wipers
(Up/Down and front/rear).
Carriage Cover
Screw
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
I/S MENU
I/S CHECK
I/S CHECK
3-25
Hook
+
MENU
[ ]
[ ]
COMPLETED