Roland VersaUV LEJ-640 Service Notes page 111

Remove the 2 screws as shown in the fi gure to remove the
9
Pump Unit.
Remove the 3 screws shown in the fi gure to remove the Mo-
10
tor from the Pump Unit.
Fix the new Pump Unit to the Motor.
Fix the Pump Unit with the 2 screws as shown in the fi gure.
11
Connect the tube of the Cap Top and the tube of the Drain.
12
Then, replace other Pumps in the same way.
Connect the tubes of Cap Top side to the left
joint, and connect the tubes of Drain side to the
right joint.
Fix the tubes fi rmly.
Make sure that the tubes at the Drain side are in-
serted to the Ink trash.
Motor
Pump Unit
Ink trash
Tube
(Cap Top side)
3-37
Tube
(Drain side)