Roland VersaUV LEJ-640 Service Notes page 97

Open the Saddle and disconnect the connector of the motor
9
cable.
Remove the 2 screws loosened in step 6 to remove the
10
motor together with the stay.
Be sure that the motor do not hit against Ink Tube
and Flexible Cable.
Remove the 2 screws to remove the motor from the stay.
11
Fix the new motor to the stay.
Install the new motor together with the stay to the Head
12
Carriage with the 2 screws temporarily.
Connector
Saddle
3-23
Screw
Screws