Fix the UV Lamp together with the plate to the Head Car-
9
riage.
Hook the UV Lamp to the tab of the stay when fi xing
it to the Head Carriage.
Connect the cable.
10
Wrap the cable around the Wire Saddle.
Move the Head Carriage to the right edge of the bed. And
11
check that the space between the UV Lamp and bed is 7mm
to 7.5mm.
If the space between the UV Lamp and bed is not 7mm to
7.5mm, go back to the step 6 and fi x the UV Lamp again.
Enter the Service Mode and perform the following check.
1. [4-13 UV LAMP CHECK]
Carriage Cover
7mm ~ 7.5mm
3-94
Tab
1
2
Cable