Roland VersaUV LEJ-640 Service Notes page 278

Go back to [UV LAMP MENU] and select [SLIDE] >
8
[SLIDE CHECK], and press the [ENTER] key.
When the Slide Check is completed properly, [COM-
PLETED] is displayed.
If [FAILED] is displayed, check the following.
- Slide Limit Sensor
- Cable of the Slide Limit Sensor
- Slide Motor
- Cable of the Slide Motor
SLIDE CHECK
FAILED ! !
Select [SLIDE] > [SLIDE AGING], and press the [EN-
9
TER] key to check that the Slide Motor moves properly
within the range of movement.
When the Slide Aging is completed properly, [COM-
PLETED] is displayed.
If [FAILED] is displayed, check the following.
- Slide Limit Sensor
- Belt tension
SLIDE AGING
FAILED ! !
Select [SLIDE] > [SLIDE CONTROL] > [HOME] and
10
press the [ENTER] key to check that the UV Lamp
moves to the Home position.
And then, select [FRONT] and press the [ENTER] key
to check that the UV Lamp moves to the Front position.
Slide Limit
Sensor Cable
Slide Limit Sensor
4-70
UV LAMP MENU
SLIDE
[ ]
SLIDE
SLIDE CHECK
SLIDE CHECK
COMPLETED
Slide Motor Cable
Slide Motor
SLIDE
SLIDE AGING
SLIDE CHECK
COMPLETED
SLIDE
SLIDE CONTROL
[ ]
SLIDE CONTROL
HOME
SLIDE CONTROL
FRONT