Roland VersaUV LEJ-640 Service Notes page 268

Select [TU] menu under [SUB MENU] > [TU CHECK].
3
[TU] menu supports the connector marked
[TAKE UP].
Although [OPTION-TU] menu is for another
connector with no name, but it is not in use.
Confi rm that [START] is selected, and press the [EN-
4
TER] key to turn on the take-up unit.
[START] or [STOP] can be selected with
the Up and Down keys.
The current setting is displayed on the left
and the new setting is displayed on the
right.
Set the AUTO switch of the Take-up Unit to either FOR-
5
WARD or BACKWARD.
Move the Dancer Roller up and down by hand, and
6
confi rm that the drive part rotates.
Make sure that the rotation direction of the
drive part is the same as the setting at 5 .
The operation status of Take-up Unit can be
confi rmed also on the LCD. [ * ] is displayed
on the right side of upper LCD while taking-
up, and not displayed while not taking-up.
TU
START START
4-60
SERVICE MENU
SUB MENU
[ ] [ ]
SUB MENU
TU CHECK
[ ]
TU CHECK
TU
[ ]
TU
START START
[ ]
TU
START START
[ ]
Drive Part
Dancer Roller