Roland VersaUV LEJ-640 Service Notes page 186

Pull out the Ink Damper from the Damper Shield and set the new Ink Damper to the Damper Shield.
7
< How to set the Damper Shield >
Cover part should be
outside.
Fix the Ink Damper to the Head.
8
Do not hold both sides of the Ink Damper so hard.
It could break.
Connect the Dampers to the Heads according to
the colors on the Ink Tubes.
Remove the Head Board Cover and fi x the Head Shield.
9
Insert the Head Shield between the board and
Head Adapter, and have the screw shown from the
hole.
< Cross-section >
Ink Damper
1. Put the Ink Damper 2. Fold the cover part to
into the Damper Shield.
wrap the Ink Damper.
Head Board
Head Adapter
Damper Shield
3. Fold the other side.
C
Head Board
Hole
3-112
4 . C l o s e t h e 2 g a p s w i t h
the tape (P/# : 3000000129
TAPE,AL 3M #425 19*55M).
Ink Damper
Gl / W
M
Y
K
Gl / W
(Sky blue)
Head Shield