Table of Contents
Advertisement
4 Adjustment
4-3 HOW TO UPGRADE FIRMWARE (Referential Time : 5 minutes)
Connect PC and EGX-600/400 with the PARALLEL CABLE.
1
It is necessary to prepare the followings to
upgrade the FIRMWARE.
1. FIRMWARE DISK
2. PC with MS-DOS
3. PARALLEL CABLE
4
Turn on the power while pressing [
2
Press [ENTER] key when the right message appears.
Open the [download.bat] in the FIRMWARE DISK.
3
BAT FILE can not be used on some PCs. Please
refer to the ReadMe File in the FIRMWARE DISK.
Turn off the power when completed.
4
72
], [
] and [
] keys.
[
],[
],[
] + POWER ON
UPDATE B.1.10
Are you sure?
[ENTER ] key
UPDATE B.1.10
Send new program
Version
[ A1.2]
UPDATE Complete!
Advertisement
Table of Contents
