Roland VersaUV LEJ-640 Service Notes page 185

Remove the 2 screws as shown in the fi gure to remove the
3
Carriage Cover.
The screws for fi xing the Carriage Cover are the
screw with washer.
Remove the Damper Plate.
4
Pull the Head Shield to the front and remove it.
5
Fix the Head Board Cover temporarily, and remove the 2 Ink
6
Dampers from the Head which will be replaced.
Be sure to remove and fi x the Ink Damper with the
Head Board Cover fi xed. It prevents the ink from
dropping on the Head Board. If the ink drops on
the Head Board, Head or Head Driving IC will be
damaged.
Remove the Ink Damper with pulling the upper
end of the Damper Shield when removing the Ink
Damper.
Carriage Cover
Damper Plate
Head Shield
Damper Shield
Head Board Cover
3-111