Press the [ENTER] key to cancel AGING.
6
Loosen the 2 fi xing screws located on the right end of
7
the belt.
Loosen the screws about 3 rounds so that
the bottom of the screw head not to contact
with the Stay.
Press the [ENTER] key to restart AGING.
8
Adjust the belt position turning the Adjustment Screw
9
as follows.
The work space is narrow. Be cautious and
try not to touch the driving pulley and belt.
Also, there are many mechanical parts
around it. You need to work carefully with
your tool not to touch them.
SCAN
NOW AGING
Stay
Screw
Stay
AGING
SCAN
4-54
[ ]
Fixing Screw
[ ]