Roland VersaUV LEJ-640 Service Notes page 155

Turn off the Main Power SW.
1
Remove the following covers.
2
I/S Cover Front Cover
Right Top Cover Panel Cover
Top Cover Left Side Cover
Front Rail Cover
Flexible Cable is connected to the Panel Board.
Do not disconnect the Flexible Cable.
After turning on the Main Power SW, turn on the Sub Power
3
SW while pressing the Left, Right and Down keys to enter
the Service Mode.
To protect the Heads, select [I/S MENU] > [I/S CONTROL] >
4
[CAP] > [OPEN]. And press the [ENTER] key to move down
the Capping Unit.
Main Power SW
< Rear view >
Top Cover
Left Side Cover
Front Cover
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
I/S MENU
I/S CONTROL
I/S CONTROL
CAP
CAP
OPEN
3-81
Front Rail Cover
Right Top Cover
I/S Cover
Panel Cover
+
MENU
[ ] [ ]
[ ]
[ ]