Roland VersaUV LEJ-640 Service Notes page 85

< HOW TO CLEAR THE HEAD INFORMATION >
After THERMISTOR CHECK and HEAD ALIGNMENT,
clear the HEAD INFORMATION from [SERVICE MENU] >
[HISTORY MENU] > [HEAD GROUP]. Select the Head that you
replaced and press the [ENTER] key.
* The Head No. becomes [HEAD 1], [HEAD 2], [HEAD 3]...
from the Head at the left end in order.
< Note for fi xing the Carriage Cover >
Fix the Carriage Cover temporarily with the 2 screws as shown in
the fi gure. And tighten them without distorting the Cover.
Be careful not to distort the Carriage Cover.
The Carriage can be distorted and it may cause the
head position problem.
The screws for fi xing the Carriage
Cover are the screw with washer.
SERVICE MENU
HISTORY MENU
[
HISTORY MENU
HEAD GROUP
[
Carriage Cover
Screw
3-11
]
HEAD GROUP
CLEAR ALL
] [ ] [ ]
HEAD GROUP
CLEAR H6
[ ]
HEAD GROUP
CLEAR H1
Hook