Roland VersaUV LEJ-640 Service Notes page 178

Disconnect the UV Lamp Cable, Motor Cable and Sensor
5
Cable from the Carriage Board.
Release the cables from the Wire Saddles.
Remove the 2 screws for removing the UV Lamp together
6
with the slider from the Head Carriage.
Hold the UV Lamp by hand when removing it.
Disconnect the connector of the Motor Cable.
7
Remove the motor from the frame, and replace with the new
8
motor.
3-104
Motor Cable
Sensor Cable
UV Lamp Cable
Carriage Board
Slider
Flame