Connect the tube of the Cap Top to the joint part of the Pump.
13
And then, replace other Cap Tops in the same way.
You can connect either tube
to the either joint part.
Fix the tubes fi rmly.
Turn on the Main Power SW, then turn on the Sub Power SW
14
while pressing the Left, Right and Down keys to enter the
Service Mode.
Select [I/S MENU] > [I/S CONTROL] > [CAP] > [OPEN], and
15
press the [ENTER] key. The Capping Unit moves down.
Move the Head Carriage by hand to the capping position.
16
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
I/S MENU
I/S CONTROL
I/S CONTROL
CAP
CAP
OPEN
3-18
+
MENU
[
]
[
]
[
]
[
]