Roland VersaUV LEJ-640 Service Notes page 79

Turn on the Sub Power SW while pressing the Left, Right
1
and Down keys to enter the Service Mode.
Select [PRINT MENU] > [HEAD RANK], and select the head
2
number of the Head that you are going to replace and input
the Head Rank written on the new head.
Input the Head Rank by selecting the digit with the Left and
Right keys, and changing the parameters with the Up and
Down keys.
Press the [ENTER] key to save the settings.
* The head number becomes [HEAD1], [HEAD2], [HEAD3]...
from the Head at the left end in order.
Remove I/S Cover and Right Inner Plate.
3
Right Inner Plate has a small hook on its right
bottom and it is inserted to the lower cover. Be
careful when removing it.
If you replace [HEAD 5], remove Right Top Cover.
MENU
SERVICE MENU
SERVICE MENU
PRINT MENU
[ ]
PRINT MENU
HEAD RANK
[ ]
HEAD RANK
HEAD 1
[ ]
HEAD RANK 1
1234567 (1/5)
ENTER
Screw
I/S Cover
Screw
3-5
+
MENU
HEAD RANK
5CY2F2F
Hook
Right Inner
Plate
Right Top Cover