Paper Side Sensor Adjustment - Roland VersaUV LEJ-640 Service Notes

Fix the following covers.
20
FRONT RAIL COVER
FRONT COVER SHIELD
Turn on the sub power while pressing the Left, Right
21
and Down keys to enter the Service Mode.
Remove the I/S Cover.
22
Select [I/S MENU] > [I/S CONTROL] > [CAP] > [CLOSE], and
23
press the [ENTER] key to move the Capping Unit up 1 step.
Align the Guides at the two ends of the Capping Unit with
the Guides at the two ends of the Head Carriage by moving
the Head Carriage by hand. Then press the [ENTER] key 2
times more to Cap the Heads with adjusting the position of
the Head Carriage.
Carry out the following adjustment.
24
1. [4-5 LIMIT POSITION & CUT DOWN POSITION INITIALIZE]

2. [4-14 PAPER SIDE SENSOR ADJUSTMENT]

3. Check if sheet cut is done properly
Revised 1
4-81
Front Cover Shield
MENU
MENU
SERVICE MENU
Screw
I/S Cover
Screw
Guide
Front Rail Cover
+
Hook
Guide