Unit Repair Overhaul; Engine Assembly - Suzuki RA410 Manual

UNIT REPAIR OVERHAUL

ENGINE ASSEMBLY

REMOVAL
1) Drain coolant.
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
2) Drain engine oil and transmission oil.
3) Remove exhaust pipe.
4) Remove stabilizer bar.
Refer to Section 3D.
5) Remove right-hand stabilizer bracket.
6) Remove drive shafts.
Refer to Section 4A.
7) Remove engine hood and front bumper.
Refer to Section 9.
8) Remove battery and it's tray.
9) Remove air cleaner assembly (1), resonator (2) and their hoses
as previously outlined.
ENGINE MECHANICAL 6A4-63