Suspension Control Arm/Bushing - Suzuki RA410 Manual

3D-16 FRONT SUSPENSION
1
1
1
Install brake disc and brake caliper.
Tighten brake caliper bolt to specified torque.
Tightening torque for brake caliper
1, (a)
85 N·m (8.5 kg-m, 61.5 lb-ft)
Depress foot brake pedal and hold it there.
Tighten new drive shaft nut (1) to specified torque.
Tightening Torque
(a): 175 N·m (17.5 kg-m, 127.0 lb-ft)
Caulk drive shaft nut (1) as shown.
CAUTION:
Be careful while caulking nut so that no crack will oc-
cur in caulked part of nut. Cracked nut must be re-
placed with new one.

SUSPENSION CONTROL ARM/BUSHING

REMOVAL
1) Remove stabilizer bar nut (1).
2) Remove stabilizer bar mount brackets (1) by removing bolts.
3) Remove suspension control arm ball joint bolt (1).