Suzuki RA410 Manual page 615

A: Caulking
"A"
4
1
3
3, (a)
2
5) Caulk seal (1) at A using caulking tool and hammer.
1
6) Hook return spring (1).
"B"
7) Apply grease to release bearing (2) inside and release shaft arm
2
8) Apply small amount of grease to input shaft spline (4) and front
9) Set release arm (1) to release shaft aligning their punching
1
(3), then set bearing.
"A": Grease 99000-25010
end as well.
"B": Grease 99000-25210
marks (2) and tighten bolt (3).
Tightening Torque
(a): 13 N·m (1.3 kg-m, 9.5 lb-ft)
CLUTCH 7C-11