Unit Repair Overhaul; Engine Assembly - Suzuki GRAND VITARA XL-7 Owner's Manual

6A2-26 ENGINE MECHANICAL (H27 ENGINE)
2
1

Unit Repair Overhaul

Engine Assembly

REMOVAL
1) Release fuel pressure in fuel feed line. Refer to "FUEL
PRESSURE RELIEF PROCEDURE" in Section 6.
2) Disconnect negative (–) cable at battery.
3) Remove engine hood.
4) Drain engine oil.
5) Drain coolant.
6) Remove radiator, radiator fan shroud, cooling fan and radia-
tor reservoir. Refer to "COOLING FAN AND FAN CLUTCH"
and "RADIATOR" in Section 6B.
7) Disconnect accelerator cable (1) and A/T throttle cable (for
A/T vehicle) (2) from throttle body.
8) Remove strut tower bar and surge tank cover.
9) Disconnect IAT sensor coupler and MAF sensor coupler then
remove air cleaner upper case, intake air hose, intake air
pipe and surge tank pipe as a component.
10) Remove engine oil level gauge guide and A/T fluid level
gauge guide (for A/T vehicle).
11) Remove ignition coil covers.