Centering Contact Coil (For Vehicle With Air Bag System); Combination Switch; For Vehicle With Air Bag System - Suzuki RA410 Manual

3C-8 STEERING WHEEL AND COLUMN
1
CENTERING CONTACT COIL (FOR VEHICLE WITH
AIR BAG SYSTEM)
1) Check that vehicle's wheels (front tires) are set at straight-
ahead position.
2) Check that ignition switch is at "LOCK" position.
3) Turn contact coil counterclockwise slowly with a light force till
contact coil will not turn any further.
NOTE:
Contact coil can turn about 5 turns at maximum, that is, if
it is at the center position, can turn about two and a half
turns both clockwise and counterclockwise.
4) From the position where contact coil became unable to turn any
further (it stopped), turn it back clockwise about two and a half
rotations and align center mark (1) with alignment mark.
COMBINATION SWITCH (FOR VEHICLE
WITHOUT AIR BAG SYSTEM)/CONTACT
COIL AND COMBINATION SWITCH AS-
SEMBLY (FOR VEHICLE WITH AIR BAG
SYSTEM)
CAUTION:

For vehicle with air bag system:

Do not turn contact coil (on combination switch) more
than allowable number of turns (about two and a half
turns from the center position clockwise or counter-
clockwise respectively), or coil will break.
REMOVAL
1) Remove steering wheel from steering column. Refer to STEER-
ING WHEEL in this section.
2) Remove steering column hole cover (1).