Suzuki RA410 Manual page 384

STEP
4 Check TP sensor for adjusting properly by re-
ferring TP SENSOR ADJUSTMENT.
Is it adjusted properly?
5 1) Perform TP SENSOR INSPECTION in this
section.
Is resistance within specified value?
NOTE:
Upon completion of inspection and repair work, perform DTC CONFIRMATION PROCEDURE in this sec-
tion and confirm that the trouble has been corrected.
Fig. for Step 3
ACTION
"b"
ENGINE AND EMISSION CONTROL SYSTEM 6E1-19
YES
Go to Step 4.
Poor connection of TP
sensor connector termi-
nal.
If OK, substitute a known-
good ECM/PCM and re-
check.
NO
Adjust TP sensor.
Faulty TP sensor.