Suzuki RA410 Manual page 267

6A4-8 ENGINE MECHANICAL
1
2, (a)
6) Before reinstalling oil pressure switch (2), be sure to wrap its
screw threads with sealing tape (1) and tighten switch to speci-
fied torque.
NOTE:
If sealing tape edge is bulged out from screw threads of
switch, cut it off.
Tightening Torque
.
(a): 12 N m (1.2 kg-m, 9.0 lb-ft)
7) Start engine and check oil pressure switch for oil leakage.
If oil leakage is found, repair it.
8) Install front bumper (refer to Section 9).